All Posts

The technician successfully resolved an outage affecting the site's CRIND system and dispensers. Issues with network configuration and a non-responsive Avalon wireless receiver were diagnosed and rectified, restoring full transaction capabilities.

The CRIND system was down on all dispensers, preventing credit and debit transactions. After troubleshooting the Avalon wireless units and network settings, it was discovered the receiver was not powered. The issue was resolved by repositioning the power supply, restoring full functionality to all dispensers.

This is a placeholder for the summary.

Technicians resolved an error code on diesel pump 8 by resetting and reprogramming the unit, restoring it to full functionality. Additionally, recommendations were made for pump 7 and card readers on other units, with pump 8 confirmed operational before departure.

This is a placeholder for the summary.

The diesel filter was replaced, and water was successfully removed from the diesel tank through bottom sampling. Subsequent sampling confirmed the absence of water, resolving the initial issue.

Water was successfully removed from the diesel tank and dispenser lines. All systems were tested and confirmed to be free of water, ensuring optimal fuel quality and dispensing.

Our technician conducted a thorough inspection and tune-up of the HVAC system. The service ensured the system is running at peak efficiency and providing optimal comfort.

After spending years in the petroleum service industry, I’ve learned that fuel system compliance directly impacts operational safety, environmental protection, and the long term stability of the businesses we serve. Too often, compliance gets pushed aside until inspection time or after a failure has already occurred. That approach creates unnecessary risk for operators, technicians, customers, and the environment. Modern fuel systems are more advanced than ever before. Underg

Technician addressed a card reader error on dispenser 28 by reseating loose Ethernet connections and clearing receipt printer jams on dispensers 27 and 28. The issue was resolved, and both dispensers are now operating normally.

Technicians successfully managed the logistical challenge of ordering and receiving necessary parts for on-site repair. This ensured that the required components were available when needed, facilitating a smooth and efficient service process.

Routine maintenance was performed on the HVAC system to ensure optimal performance. The condenser coil was cleaned, refrigerant levels were verified, and the thermostat was tested for accurate operation. The system is now functioning efficiently.

Technician investigated an issue with non-ethanol fuel not pumping. Testing confirmed both dispensers are functioning correctly and dispensing at the expected rate. No further issues were identified.

The technician successfully improved cable management under the counter by organizing and removing unnecessary wiring. Equipment including Invenco Edge boxes, an Applause box, and a pinpad power supply were securely mounted. Further extensive work may necessitate a scheduled site shutdown.

The service involved managing liquid levels within a tank, ensuring it did not exceed the 3500-gallon limit. Operations were conducted with careful attention to the 150-gallon threshold for excess liquid.

Technicians successfully replaced faulty pinpads at fueling positions 1 and 6, resolving critical transaction errors. Following these replacements, all fueling positions were tested and confirmed to be fully operational, restoring complete service to the site.

Technicians diagnosed an inoperable off-road diesel dispenser. Despite troubleshooting and identifying a low fuel level, internal access limitations prevented a full repair. Replacement of the unit was recommended.

Technicians successfully updated all dispensers to the latest software version, 52.14.07. This ensures optimal performance and functionality of the equipment.

The scope of work included the professional installation of product piping for four dispensers and the dewatering and ballasting of two 15,000-gallon underground storage tanks. All procedures were conducted in strict accordance with project specifications, applicable codes, and manufacturer guidelines, ensuring a safe and compliant outcome.

The diesel pulser kit pump 13 was successfully replaced. This service ensures optimal performance and reliability of the equipment.